REAL DOORS

Installation

The structure of the CAL doors resembles the structure of a tree. The tree has roots, trunk, bark and crown and our complete set of exterior door consists of leaf, frame, thermally broken threshold fully integrated with TOP® (Thermal Threshold Beam), appropriate coating and a recommended roofing. Similarly to trees, they require care and professional service.

By learning from nature and drawing on the best carpentry traditions, we used the acquired knowledge and experience in our products.

Care and professional service

The tree growth period is about 150 years. The preparation of wood for production and the manufacturing process itself will last for at least several months. Would you like to ruin such a valuable product with inappropriate installation?

AIG

Ensure correct installation in a conscious and responsible manner. Use the services of the Authorized Installation Groups (AIG).

Authorized Installation Groups are experienced professionals who know how to proceed with CAL products. They had to prove their knowledge and skills by going through exhausting and difficult tests. It’s a pass to the world of the CAL doors, where everything works as it should.

Authorized Installation Groups

How a tree is built and what follows from this?

  • Crown

    The crown, which consists of the leaves and branches at the top of a tree, plays an important role in filtering dust and other particles from the air. It also helps cool the air by providing shade and reduces the impact of raindrops on the soil below.

    External doors should be protected from direct precipitation and sun influence by putting them in niches, or by using roofing to cover doors assembled in straight walls. In the CAL door, the recommended roofing or niches function as a crown.

  • Trunk/Stem

    The trunk or stem, of a tree supports the crown and gives the tree its shape and strength. The trunk consists of four layers of tissue. These layers contain a network of tubes that runs between the roots and the leaves and acts as the central nourishing system for the tree.

    In the CAL doors, these are laminated engineered stiles, reinforced with steel or aluminium profiles as a standard for all collections. It is to increase the rigidity of the door and to prevent it from warping and it’s also to take over most of the loads to which the door is subjected, to such as: wind pressure, loads carried by hinges, changing weather conditions.

  • Bark

    The trunk, branches and twigs of the tree are covered with bark. The outer bark, which originates from phloem cells that have worn out, died and been shed outward, acts as an armor against the world by protecting the tree from insects, disease, storms and extreme temperatures. In certain species, the outer bark also protects the tree from fire.

    In the CAL doors, eco-friendly coating system ensures an attractive and natural look, that will last for many years and will protect from the impact of external conditions such us: moisture, dirt, dust, insects, fungi or generally occurring pollutions and additionally fulfill the aesthetic role. Regular maintenance of varnish coatings allows for a significant extension of the door service life.

  • Roots

    Tree roots absorb water and nutrients from the soil, store sugar and anchor the tree upright in the ground. All trees have lateral roots that branch into smaller and smaller roots and usually extend horizontally beyond the ends of branching.

    In the CAL doors it’s a insulated threshold assembly. TOP® which has been specially designed to be fully integrated with the CAL standard thermally broken threshold, protects the door from long term damage, eliminates thermal bridges under the door, and also allows the door to do what it was designed to do: insulate the house from the cold (or hot) outside. The addition of the TOP component simply gives better performance to your door and despite high resistance to moisture and excellent thermal insulation its properties also include high resistance to compression.

Regardless of the precautions, the CAL door should be stored outside only in exceptional situations and for a short period (several days).

Delivery & Storage

Improper storage of the door by exposing it to moisture for a certain period of time is one of the factors affecting functionality and durability.

Acting successfully and with a sense of responsibility, it assumes that the external doors should be protected against: direct precipitation (rain and snow), sun influence, dust and other factors that may cause damage.

The following principles must be observed:

1. It should be stored in rooms on an even level

2. If stored outside, the door must be placed on a solid and level ground, and the top and sides of the pallet must be covered with a non-transparent, waterproof material that provides proper protection against bad weather conditions.

3. There must be sufficient clearance on the pallet to ensure free air circulation. Please note: the manufacturer’s packaging is intended for door protection during delivery from the factory to the recipient’s warehouse.

AIM knows how to secure and properly place the door. This affects not only the comfort of everyday operation, but also helps avoid unpleasant surprises such as: damages, leaks or warping. A careful, well done installation not only protects the door from long term damage, but also allows the door to do what it was designed to do: insulate the house from the cold (or hot) outside. A wrong installation can simply ruin the best product.

Installation and operating conditions of external doors.

High quality products also require a perfect installation. CAL was one of the first manufacturers to introduce a comprehensive guideline for installation and operating conditions of external doors as well as the program of Authorized Installation Groups (AIM)

  1. ROOFING – external doors should be protected from direct precipitation and sun influence by putting them in niches, or by using roofing to cover doors mounted in straight walls. Roofing should extend beyond the outline of the open door and protect the door from direct sunlight at noon, during the summer.
  2. HEAT SOURCE – The minimum distance from the heater to the door should be 150 cm.
  3. INSTALLATION – Wooden exterior doors should be installed after the “wet” construction works inside the building, such as plastering and flooring works, are completed and dried.

Materiały do ciepłego montażu i pielęgnacji

Termiczna Osłona Podproża®

Zestaw współpracuje z progiem aluminiowym 100mm. W przypadku zamawiania do wcześniej wyprodukowanych drzwi proszę podawać całkowitą szerokość drzwi (z naświetlami) lub nr zamówienia drzwi.

Cena za dany komplet TOP®

Szerokość drzwi Cena
Do 1250 mm 295,20 zł*
1251 - 1500 mm 442,80 zł*
1501 - 2500 mm 590,40 zł*
*50% rabatu na TOP® przy zakupie z drzwiami zewnętrznymi CAL

* Purenit, to niemiecki materiał izolacyjny. Powstaje z połączenia pianki poliuretanowej i opiłków aluminiowych. Charakteryzuje się wysoką odpornością na działanie środków chemicznych, wilgoci oraz grzybów. Cechuje go wysoka odporność na ściskanie, oraz doskonałe właściwości termoizolacyjne. Zaletą purenitu są nie tylko świetne właściwości, ale również łatwość w obróbce.

Belka podwalinowa z purenitu

To element kontstrukcyjny cechujący się bardzo dobrymi parametrami cieplnymi i wytrzmałościowymi. Purenit* o długości 1200 mm i grubości 50 mm daje się w prosty sposób ciąć, wiercić, strugać uniwersalnymi narzędziami i łączyć w warunkach budowy. Pozwala na uzyskanie stabilnego podłoża pod drzwi z TOP® na poziomie -80 mm.

Cena belki podwalinowej

Podwalina purenitowa 50 x 95 x 1200 mm/ 1szt. 159,90 zł

Zaleca się zabezpieczenie powierzchni drzwi 2-3 razy w roku środkiem pielęgnacyjnym do drewna (do konserwacji nie można stosować środków alkaicznych ani rozpuszczalnikowych).

Zestaw Ottimo Door Care

Zestaw Ottimo Door Care przeznaczony jest do czyszczenia, odświeżania i regeneracji powierzchni drzwi. Składniki płynów umożliwiają stosowanie ich zarówno na powierzchnię drzwi zewnętrznych i wewnętrznych. Środki skomponowane zostały na bazie wody, więc są przyjazne dla środowiska.

Cena zestawu Ottimo Door Care

Zestaw do pielęgnacji drzwi 77,49 zł
Door Cleaner 250 ml
Door Refreshener 250 ml
Ściereczki trykotowe 2 szt.

Do ościeżnic CAL zalecamy ISO-BLOCCO One 74/5-30 o szerokości taśmy 74mm, grubości przed rozprężeniem 5mm, a optymalnej do 30mm oraz długim czasie rozprężania, dzięki temu daje czas na dokładny montaż.

ISO-BLOCCO One 74/5-30

Taśma rozprężna do szybkiego ciepłego montażu drzwi. Spełnia funkcje takie jak: izolacja termiczna i akustyczna, izolacja od odpadów atmosferycznych od strony zewnętrznej, paraizolacja od strony wewnętrznej. Ułatwia ona szybki i bezproblemowy montaż przy 10oC, przy niższych temperaturach czas rozprężania ulega wydłużeniu.

Cena ISO-BLOCCO One 74/5-30

ISO-BLOCCO One 74/5-30 (6mb) 239,85 zł

ISO-CONNECT Vario SD

Uniwersalna taśma do ciepłego montażu o szerokości 70mm z butylowym paskiem klejowym do zabezpieczenia pianki montażowej.
Od strony wewnętrznej paroszczelna, od zewnętrznej paroprzepuszczalna. Chroni piankę przed wilgocią i promieniowaniem UV od zewnątrz, parą wodną od wnętrza domu. Umożliwia parowanie wody ze spoiny izolacyjnej na zewnątrz.

Cena ISO-CONNECT Vario SD

ISO-CONNECT Vario SD (15mb) 129,15 zł